SHOWTEC DMX MERGE

184,00

The Showtec DMX Merge allows you to combine two DMX controllers to one DMX line or to use a second desk as back-up desk.

Κωδικός προϊόντος: 190053 Κατηγορία: Ετικέτα:

Περιγραφή

The unit has 4 modes:1) HTP (Highest Take Precedence) In this case you can use two similar desks with the same addressing on one line. The DMX channel with the highest value has priority.2) Back-up mode. The unit is connected to two DMX desks. Channel A has priority. Once channel A fails or has no DMX channel B takes over the show.3) Merge mode. Two desks can be merged on one line. E.g. you can run a scene setter and DMX operator on one line. The Scene Setter will operate on channel 1-96 and the DMX Operator will have the channels 97 and higher. These positions can be freely addressed by the dip-switches.4) LTP (Latest Take Precedence) In this case you can use two similar desks with the same addressing on one line. The DMX input with the latest value change has priority.Merge 2 DMX controllers to one DMX lineSelect Back up or merge modeProtocols: DMXDMX Channels: 512Power Supply: 9VDCPower Consumption: 4,5 WPower Connector in: Low Voltage DC plugDMX input: 3-pin XLR (male) 2x on the front and 2x on the backDMX output: 3-pin XLR (female) 1x on the front and 1x on the backIP Rating: IP20(indoor use only)Housing: Aluminum Die-castRack Units: 1 UDimensions: 482 x 73 x 44 mm (LxWxH) Weight: 1.15kgColour: Grey